Dublin, Ireland

Ignisorigo

Honest guides for everyday decisions

Home › Digital

Digital

Picture modes, motion smoothing and the other defaults to undo on a new TV

A new television ships tuned for a bright showroom, not your living room. Half an hour with the remote puts that right.

Posted by Jonah Ibarra 5 min read

The box is flattened in the hallway, the stand is screwed on, and the first film goes on. Something is off. Faces look sunburnt, the whites have a blue cast, and a drama shot on expensive cameras moves like a daytime soap filmed on a camcorder. Nothing is broken. The set is doing exactly what it was configured to do, which is to stand out on a wall of forty other screens under shop lighting. Undoing that takes about half an hour and no equipment. The menus differ from one manufacturer to the next and the names change, but the same handful of controls sit in every set, and they do the same things.

Start with the picture mode, not the sliders

Every television has a short list of presets. One will be called something like vivid or dynamic, one standard, and one aimed at films: cinema, movie, or a mode named after filmmakers. The film-oriented preset is almost always the most accurate, because it is built around the standards that studios master their pictures to. Selecting it fixes most of what looked wrong in a single step.

It will look dull and slightly yellow for the first evening. That is your eyes, not the screen. After an hour of the blue-tinted default, a correct white looks warm by comparison. Live with it for two or three evenings before judging, then switch back to the vivid preset for a minute. Most people find it unwatchable by then.

One catch: presets are usually stored separately for each input, and often separately again for high dynamic range content. Setting the mode while watching a built-in app does nothing for the games console on another input. Repeat the choice for every source you use, and again the first time an HDR badge appears on screen.

The processing worth switching off

On top of the preset sits a layer of picture processing, most of it switched on by default and most of it better off. The film preset disables some of it. Check the rest by hand.

  • Motion smoothing. It invents extra frames between the real ones, which is what makes films look like cheap video. Turn it off for films and drama. Some people like a low setting for sport, which is a fair use.
  • Noise reduction. Designed for poor broadcast signals. On a clean modern source it smears fine detail such as skin and fabric.
  • Dynamic contrast and anything described as an enhancer. These shift the brightness of the whole image scene by scene, crushing shadow detail and making the picture pump.
  • Ambient light sensors and aggressive energy-saving modes. These dim the picture according to the room. Useful if it suits you, baffling if you do not know it is on and wonder why the screen keeps changing.

Sharpness deserves its own mention, because the name misleads. The control cannot add detail that is not in the signal. It draws a faint bright outline around edges, which reads as crispness from across a shop and as a halo from a sofa. Turn it down until the outlines around text and subtitles disappear. On many sets the neutral point is at or near zero, on others it sits in the low part of the range.

Set the brightness for the room you have

Two controls get confused here. The one that decides how much light the panel puts out is usually called backlight, or panel light on self-lit screens. The one labelled brightness typically sets the black level, meaning how dark the darkest parts are. Raise the light output for a sunny room and lower it for evening viewing. Leave the black level control alone unless shadows are visibly grey or visibly swallowing detail.

Backlight or panel lightOverall light output. The one to adjust for day and night.
BrightnessBlack level. Too high and blacks turn grey, too low and shadow detail vanishes.
ContrastThe level of the brightest whites. Too high and clouds and snow lose their texture.
ColorSaturation. The film preset usually has this right already.
Color temperatureThe tint of white, from bluish to reddish. Warm settings are closest to the standard.
What the confusingly named controls actually do

With HDR content the set generally takes charge of light output itself and runs the panel as hard as the content asks. That is intended. If HDR looks too dark in a bright room, the fix is closing a curtain rather than fighting the menu.

Inputs, games and sound

A console or computer wants the opposite treatment from a film. All that processing takes time, and the delay between pressing a button and seeing the result is noticeable in anything fast. Game mode strips the processing out to cut that delay. Many sets switch to it automatically when a console announces itself, but confirm that it has.

Check the ports as well. On plenty of televisions only some of the HDMI sockets support the highest refresh rates and the full signal quality, and they are labelled on the back panel or in the manual. The full-quality signal format is often disabled per input until you enable it in the settings, which is why a new console can look no better than the old one.

Thin screens leave no room for decent speakers. Before buying anything, switch off the simulated surround effect, which tends to bury speech, and try the mode intended for clear dialogue. If you add a soundbar, connect it to the socket marked for audio return so the television remote controls the volume, and set the audio output to pass the signal through untouched.

The computer inside it

During setup a smart television asks for agreement to several things at once. One of them is typically a viewing-data feature that identifies what is on screen, from any source, and reports it for advertising. It is optional and nothing stops working if you decline. Read each consent screen separately instead of accepting them in a block, and revisit the privacy section of the settings afterward to see what was left on.

Leave automatic software updates on, since the set is a networked computer that will sit in your house for a decade. Then put the remote down. A television set up once, properly, should not need its picture menu opened again until you move house.

  • television
  • picture settings
  • home cinema
  • setup
Jonah Ibarra Features Editor

Jonah writes about the practical end of home & interior, and tests everything before writing about it.